OPERATION
10
Tennant T5e (10--06)
4. Connect the vacuum hose to the squeegee
assembly. Loop the hose as shown using the hose
clip provided (Figure 5).
FIG. 5
5. Check the squeegee blades for proper deflection.
The blades should deflect as shown (Figure 6).
FIG. 6
6. To adjust the blade deflection, place the squeegee
assembly on a level surface and adjust the casters
as shown (Figure 7).
2 mm
FIG. 7
INSTALLING BRUSHES/PADS
FOR SAFETY: Before installing brushes or pad
drivers, stop machine on level surface, remove key
and set parking brake if equipped.
Disk Model:
1. Raise scrub head off the floor and remove key.
2. Attach the pad to the pad driver before installing
the driver. Secure pad with centerlock (Figure 8).
FIG. 8
3. Align the pad driver under the motor hub and push
it upward to engage (Figure 9).
FIG. 9
4. To remove the pad driver, raise the scrub head and
push the pad release plunger downward
(Figure 10).
FIG. 10
