EN
OPERATION
12
Tennant T2 (07--08)
DRAINING TANKS
The recovery tank should be drained and cleaned out
after every use. The solution tank should be cleaned
out periodically to remove any water deposit buildup.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine and remove
key.
DRAINING RECOVERY TANK
1. While holding the drain hose upward, remove the
cap and lower hose to drain (Figure 24).
FIG. 24
NOTE:
When using a bucket to drain the machine, do
not use the same bucket to fill the solution tank.
2. Open the recovery tank cover and rinse out the
tank (Figure 25).
FIG. 25
3. Clean the float shut-off screen and debris tray
located in the recovery tank (Figure 26).
FIG. 26
DRAINING SOLUTION TANK
To drain any remaining water from the solution tank,
pull the solution tank fill gauge hose off the hose fitting
(Figure 27).
FIG. 27
