Tennant S12 Скачать руководство пользователя страница 16

Страница: 16 / 22

S12 331361 (9--05)

BATTERIES

Four batteries supply the sweeper with electrical

power. The charging condition of the batteries is

indicated by the battery condition display on the

control panel.

A. Battery--condition display

B. LED’s

When the sweeper is switched on the red LED

flashes five times. Subsequently the electronic

system of the sweeper carries out a self--testing

operation of the battery charging level. The result

of this self--testing is displayed by the 5 LED‘s.

Information provided by LED indicators on the

battery condition display:

charging condition of battery

condition fully charged
operating/charging condition uncritical
operating/only for a short time longer

lit LED

operating/soon critical
operating/critical

llo

reen

WARNING: Batteries emit hydrogen gas.

Explosion or fire can result. Keep

sparks and open flame away. Keep

covers open when charging.

FOR SAFETY: Before leaving or servicing

machine, stop on level surface, set parking

brake, turn off machine, and remove key.

FOR SAFETY: When maintaining or servicing

machine, avoid contact with battery acid.

CHARGING THE BATTERIES

1. Turn off the sweeper.

2. Open the hood.

3. Secure the hood position.

4. Disconnect the power--supply--connector from

the Charing connector.

5. Connect the charging device to the charging

plug of the sweeper.

6. Check the water level in all the battery cells. If

the level is low, add just enough distilled water

to cover the battery plates. DO NOT

OVERFILL. The batteries can overflow during

charging due to expansion.

NOTE: Make sure the battery caps are in place

while charging.

FOR SAFETY: When maintaining or servicing

machine, avoid contact with battery acid.

Содержание S12























Результаты поиска

Содержание S12

Отзывы:

Tennant S12, Руководство оператора, Страница: 16 / 22

Результаты поиска

Содержание S12

Отзывы: