9
S12 331361 (9--05)
TURNING OFF THE SWEEPER
1. Press and hold the brake pedal.
2. Lock the brake by pulling the locking lever
towards the driver’s seat.
NOTE: When the brake is released the brake
pedal must remain in pressed position.
3. Switch off all functions.
4. Raise the main brush and side brush(es) with
the levers.
5. Turn the key counterclockwise and remove it
from the key switch.
FOR SAFETY: Before leaving machine, stop
on a level surface, set parking brake, turn off
machine and remove key.
EMPTYING THE DEBRIS HOPPER
The debris hopper is where the debris is collected.
It is positioned at the back of the sweeper. The
debris hopper must be emptied after each use.
REMOVING THE DEBRIS HOPPER
1. Turn the debris hopper locking devices
upward.
2. Pull the debris hopper from the sweeper by
the handle until the front debris hopper guide
rails are free.
WARNING: Brush throws debris. Stop
motor before removing hopper.
FOR SAFETY: Before leaving or servicing
machine, stop on a level surface, set parking
brake, turn off machine and remove key.
B
C
A
D
E
A. Locking devices
B. Handle
C. Guide roller
D. Guide rail
E. Debris hopper guides
NOTE: At the back of the debris hopper two
guiding rollers are installed to make the removal
more easy.
3. Lower the debris hopper to the ground.
4. Remove the debris hopper completely from
the sweeper.
5. In order to empty the debris hopper use the
free hand to take hold of the handle.
6. The debris is discharged through the opening
at the front of the hopper.
7. Empty debris into appropriate containers only.
8. Dump heavy loads on floor or use an
assistant to help lift.
REINSERTING THE DEBRIS HOPPER
1. Position the debris hopper in front of the
sweeper opening.
2. Align the debris hopper front guides level with
guide rails.
3. Slide the debris hopper into the sweeper.
4. Turn the locking device downward.