KIT NO. 9017891
Page 1 of 3
9017892 Rev. 00 (04- 2018)
Tennant Company
www.tennantco.com
On-Board Battery Charger &
Cable Connector Retrofit Kit
Models: T350, Speed Scrub 350
This kit includes the necessary parts to replace a defective charger, caused from backfeed, and retrofit parts to modify
the cable connector configuration to prevent future battery charger damage. Install retrofit parts as instructed.
On-Board Battery Charger Replacement Parts
Ref Part No. Description
Qty.
1
1220856 Charger, 24vdc 25a 100-240vac (on-board)
1
2
26395-2
Clamp, Cable, Stl, 0.38dx0.38w, 1hole
1
3
1205799 Screw, Btn, m5x0.8x16, 8.8,nl torx
5
4
1210807 Wire, Tie [w/.25” fir tree clip]
2
Cable Connector Retrofit Parts
Ref Part No. Description
Qty.
5
1020446 Connector, Anderson, 1321 Series
4
6
1217818 Sleeve, Heatshrink, 1.5id, 07.0L
1
7
33931
Screw, Pan, Phl, m4x0.70x30, ss
2
8
1240380 Plate, Washer, Battery, Connector
1
9
1239877 Plate, Wldt, Mount, Battery Disconnect
1
10
763115
Tie, Cable, 6.0L, 1.25 max
1
Kit Contents
1
3
6
2
4
5
8
9
7
10
CABLE CONNECTOR RETROFIT
INSTALLATION INSTRUCTIONS:
Installation Time:
1 Hour
Special Tools Required:
Heat Gun
1.
Park machine on a level surface.
2.
Turn off machine and remove key.
FOR SAFETY: Before servicing machine, stop on level
surface, turn off machine and remove key.
3.
Disconnect the battery cable harness quick disconnect
connector (Figure 1).
Fig. 1
4.
Disconnect the battery cable harness from the batteries
(Figure 2).
Battery Cable
Harness
Fig. 2
5.
Remove the double pole connector from the battery
cable harness and discard. To remove connector, push
the lock tab downward with a small flat-head
screwdriver and pull the cable outward (Figure 3).
Push lock tabs downward
Fig. 3
6.
Remove and discard the protective boot (Figure 4).
Fig. 4
