OPERATION
EN
11
Tennant E5 (03--08)
AFTER EVERY 100 HOURS OF USE
1. Flush the solution system with white vinegar to
remove any chemical deposits. Pour 1/2 gal/2.2 L
of white vinegar into the solution tank and operate
the machine for 1--2 minutes, then let vinegar sit
for up to six hours. Rinse solution system with
water.
2. Remove the spray tips and soak in white vinegar
to prevent clogging. Do not use a pointed object to
clean out spray tip, damage will occur (Figure 33).
FOR SAFETY: When servicing machine, unplug
power cord from wall outlet.
FIG. 33
BRUSH MOTOR MAINTENANCE
Contact an Authorized Service Center for carbon
brush replacement.
Carbon Brush Replacement
Hours
Brush Motor
500
STORING MACHINE
Empty tanks and store the machine in a dry area in the
upright position. Neatly wrap power cord around handle
and cord hook. Remove the brush to prevent a flat spot.
If storing machine in freezing temperatures, purge
solution system and pump from all water.
WARNING: Electrical Shock Hazard. Do Not
Use Outdoors. Do Not Expose To Rain. Store
Indoors.
RECOMMENDED STOCK ITEMS
Refer to the Parts List Manual for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
