Tennant 385DLH, Руководство оператора

Страница: 57 / 86

MAINTENANCE
55
385 MM321 (3–97)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
50 Hours 13 Main brush Rotate end-for-end – 1
6 Fuel pipes and clamps Check for tightness and wear – 1
100 Hours 6 Engine crankcase Change oil and filter EO 1
4 Engine fan belt Check tension – 1
10 Hopper dust filter Check for damage, clean or re-
place – 1
3 Radiator Clean core exterior – 1
Check coolant level WG 1
2 Hydraulic fluid reservoir Check fluid level HYDO 1
1 Rear tire Check pressure – 1
8 Main brush and hopper
seals Check for damage or wear – 8
200 Hours 3 Radiator hoses and clamps Check for tightness and wear – 2
15 Parking brake Check adjustment – 1
14 Brake pedal Check and adjust travel – 1
1 Rear wheel support
bearings Lubricate SPL 1
11 Side brush guard Rotate 90 – 1
400 Hours 9 Front wheel bearings Check, lubricate, and adjust SPL 2
6 Fuel filter Replace cartridge – 1
17 Fuel tank Remove sediment – 1
3 Cooling system Flush WG 1
800 Hours 2 Hydraulic reservoir Replace hydraulic breather – 1
Replace suction strainer – 1
Change hydraulic fluid HYDO 1
5 Hydraulic fluid filter Change filter element – 1
2 Hydraulic hoses Check for wear and damage – 31
1 Propelling motor *Torque shaft nut – 1
1 Rear wheel *Torque wheel nuts – 1
16 Battery *Clean and tighten battery cable
connections – 1
LUBRICANT/FLUID
EO Engine oil, SAE–CC/CD rated . . . .
HYDO Tennant Company or approved hydraulic fluid .
WG Water and permanent-type ethylene glycol anti-freeze, –34 C . . .
SPL Special lubricant, Lubriplate EMB grease (TENNANT part no. 01433–1) . . .
NOTE: Also check procedures indicted (*) after the first 50Ćhours of operation.