Tennant 215E, Руководство оператора

Страница: 22 / 62

OPERATION
215E MM158 (11--91)
2-14
TRANSPORTING MACHINE
PUSHING OR TOWING MACHINE
The machine may be slowly pushed only from the
rear, pushing on the machine frame.
The machine may be slowly towed from the front.
Use care when attaching towing cables or chains
to avoid damaging the machine.
MACHINE JACKING
The machine may be jacked up for service at the
designated locations. Use a jack of adequate
capacity and good working condition. Always stop
the machine on a flat, level surface and block the
tires before jacking the machine up. The front
jacking locations are on the flat bottom edge of
the machine frame next to the front tires.
The rear jacking location is the middle flat bottom
edge of the rear bumper.
TO JACK UP MACHINE
1. Empty the debris hopper.
2. Stop the motor and set the machine parking
brake.
FOR SAFETY: Before Leaving Or Servicing
The Machine; Stop On Level Surface, Set
Parking Brake.
3. Block the tires, which are not being jacked
up, in order to secure the machine position.
FOR SAFETY: When Servicing Machine, Block
Machine Tires Before Jacking Machine Up.
4. Use a jack of adequate capacity to raise the
machine. Jack up the machine only at the
designated locations.
FOR SAFETY: When Servicing Machine, Jack
Machine Up At Designated Locations Only.
Block Machine Up With Jack Stands.
A
03070
FRONT JACKING LOCATION
A. Jacking Location
A
03071
REAR JACKING LOCATION
A. Jacking Location
5. Block machine up with jack stands or similar
devices in the designated locations to
secure the machine.
6. Lower the machine onto the jack stands.
7. Check to make sure the machine is secure.
8. Service the machine as required.
9. When finished servicing the machine, raise
the machine off the jack stands.
10. Remove the jack stands from under the
machine.
11. Lower the machine.
12. Remove the blocks from the tires.