Tennant 215, Руководство оператора и каталог запасных частей

Страница: 19 / 68

OPERATION
2-11
215 MM157 (4--90)
MACHINE OPERATION
NORMAL SWEEPING OPERATION
A normal sweeping operation consists of seven
typical operations: pre-start checklist, starting
machine, sweeping, dumping hopper, post
operation checklist -- engine operating, stopping
machine, and post operation checklist -- engine
stopped.
PRE-START CHECKLIST lists things to check
before starting the machine.
TO START MACHINE lists the steps required to
start the machine.
TO SWEEP lists things to keep in mind before
and during the sweeping operation.
TO DUMP HOPPER lists the steps required to
dump the hopper.
POST OPERATION CHECKLIST -- ENGINE
OPERATING lists things to check before stopping
the machine engine.
T O STOP MACHINE lists the steps required to
stop the machine.
POST OPERATION CHECKLIST -- ENGINE
STOPPED lists things to check after stopping the
machine engine.
PRE-START CHECKLIST
Check under machine for leak spots.
Check engine lubricating oil level.
Check fuel level.
Check for LPG odor or frosting on hoses or
components indicating a leak.
Check brakes and controls for proper operation.
Check service records to determine service
requirements.
TO START MACHINE
NOTE: Before starting machine, perform the
pre-start checks.
1. LPG machines: Slowly open the liquid
service valve.
NOTE: Opening the service valve too quickly may
cause the service valve check valve to stop the
flow of LPG fuel. If the check valve stops the flow
of fuel, close the valve, wait a few seconds, and
slowly open the valve once again.
2. The machine operator must be in the
operator’s seat with the directional control
pedal in the “neutral” position and with a foot
on the brake pedal or with the parking brake
set.
FOR SAFETY: Before Starting Machine,
Make Sure All Safety Devices Are In
Place And Operate Properly.
3. Gasoline powered machines: When the
engine is cold, pull out the choke knob about
three-fourths of the way. Push choke in after
the engine has started and is running
smoothly.
LPG powered machines: When the engine is
cold and exposed to cold temperatures,
open the seat support, press the primer
button on the LPG regulator, and close the
seat support.
4. Turn the ignition switch key clockwise.
5. Push the start switch until the engine starts.
Do not operate the starter for more than 10
seconds at a time or after the engine has
started.
NOTE: Do not operate the starter motor for more
than 10 seconds at a time or after the engine has
started. Allow the starter to cool between starting
attempts. The starter motor may be damaged if it
is operated incorrectly.
6. Release the machine parking brake.
7. Drive the machine to the area to be swept.