Tennant 215, Руководство оператора и каталог запасных частей

Страница: 16 / 68

OPERATION
215 MM157 (4--90)
2-8
HOPPER DOOR SWITCH
The hopper door switch controls the hopper door
position. The hopper door should always be
open except when high dumping the hopper. To
high dump the hopper, move the hopper door
switch to the top position to close the hopper
door, raise the hopper with the hopper switch,
then move the hopper door switch to the bottom
(Hopper Door Open) position to open the
hopper door to empty the hopper. After the
hopper has emptied, move the hopper switch to
the top (Hopper Down) position until the hopper
has lowered.
HOPPER SWITCH
The hopper switch controls the hopper position.
To dump the hopper, move the switch to the
bottom (Hopper Up) position. After the hopper
has emptied, move the switch to the top (Hopper
Down) position until the hopper has lowered.
HORN BUTTON
The horn button operates the machine horn. It is
located on the instrument panel.
IGNITION SWITCH
The key-operated ignition switch has two
positions. To start the engine, turn the key to the
right. To turn the engine off, turn the key to the
left.
START SWITCH
The start switch controls the engine starter
motor. To start the engine, turn the key-operated
ignition switch clockwise and push the start
switch.
NOTE: Do not engage the starter for more than
ten seconds at a time, or after the engine has
started, as the starter may be damaged.
ENGINE CHOKE KNOB
The engine choke knob controls the engine
choke which helps start cold engines. To engage
the choke, pull the knob out. To disengage the
choke, push the knob in. Do not choke a warm
engine.
MAIN BRUSH POSITION LEVER
The main brush position lever controls the
position of the main brush. To raise the main
brush, pull the lever back into the (Main Brush
Up) position. To lower the main brush, pull the
lever back and release it into the (Main Brush
Down) position.
When parking the machine, always raise the
brush to prevent the bristles from taking a set.
SIDE BRUSH POSITION LEVER
The side brush position lever controls the position
and the drive of the side brush. To raise the side
brush, pull the lift lever back into the (Side Brush
Up) position. To lower the brush, pull the lever
back and release it into the (Side Brush Down)
position.
When parking the machine, always raise the
brush to prevent the bristles from taking a set.
A B
C
D
03064
BRUSH CONTROLS
A. Main Brush Lever
B. Side Brush Lever
C. Main Brush Height Adjustment
Knob
D. Instrument Panel
STEERING WHEEL
The steering wheel controls the rear caster wheel.
The machine is very responsive to the movement
of the steering wheel. The operator should use
care until he or she becomes experienced in
guiding the machine.
MAIN BRUSH HEIGHT ADJUSTMENT KNOB
The main brush height adjustment knob (Main
Brush Extra Down Pressure) adjusts the main
brush contact with the floor. To increase main
brush contact with the floor, turn the knob to the
right. To decrease main brush contact with the
floor, turn the knob to the left.