Tenmars TM-601N, Руководство пользователя

Страница: 7 / 24

TM-601N/603/604
EN-5
correct them before going to the next
step.
„
Exchange L1 and L3. If the green lamp
goes ON, it means the 3 phases are
correct. (In this case, skip to step 6.) If
the red lamp ER goes ON, it means the 3
phases are wired incorrectly. You must
correct them before going to the next
step.
„ Exchange L1 and L2. If the green lamp
goes ON, it means the 3 phases are
correct. (In this case, skip to step 6.)
„ Note the definition for L1, L2 and L3
each.
5.2. How to test the motor’s
direction of rotation
„
Make sure the motor’s power source has
been removed.
„
Connect the test wire to the motor
terminal. In each test, press the power
button, then check the indicators on the
panel: when the motor is not turning, the
red lamp is ON.
„ The green lamp goes ON when the motor