TM-380
6
5.6
LOG starts the auto-recording function
Press and hold
for more than 2 seconds, “
”
appears on the LCD, and auto-recording starts. If the power
is
insufficient
during
auto-recording,
appearing,
auto-recording will be forcibly stopped. When reaching the
maximum log number 20,
appears.
Press and hold
again for more than 2 seconds to exit
the auto-recording function.
5.7
Read the data recorded in the memory
Press
to enter the memory-reading mode, while
and the log number appear on the LCD for one second, the
record is then displayed. Read the data recorded in the
memory with
or
.
Press and hold
to exit this mode.
5.8 °C or °F units
At the shutdown status, press and hold
, then press
to turn on the meter, after the software version appears,
release
.
Repeat the above steps to switch the unit.
5.9 Clear memory
At the shutdown status, press and hold
and then press
to turn on the meter, the
and software version
appears successively on the LCD, release the
to clear
the memory.
Содержание TM-380
Страница 1: ...Multi IAQ Monitor TM 380 User s Manual HB2TM3800000 ...
Страница 2: ......
