
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <7>
V1.0
12/04/18
5-5. Duct Shape and Parameters Setting
When the meter is in parameters setup mode. The screen is show number of the last duct shape and size that is entered. If
the duct is different than the stored version, then find the proper duct type for the measurement (rectangular or round).
5-6. Choose Duct Shape
• When the meter is in setup mode, Press
“Unit ”
or
“Unit ”
to scroll to the duct shape setup option.
• Press
“Avg/Rec”
button. The screen shows the
“
”
(rectangle) or
“
”
(circular).
• Press
“Unit ”
or
“Unit ”
to scroll to the setup option you want to change.
• Press
“Avg/Rec”
to store the new setting in memory and enter parameters setup option.
5-7. Parameters Setting
•
If duct is rectangle, the height of duct numbers and “H=” will be first shown in the primary show.
• Press
“Unit ”
or
“Unit ”
button to select the decimal point.
• Press
“save/Clear”
to change the station of flashing digit and press
“Unit ”
or to
“Unit ”
change the flashing digit
from 0 to 9.
• Pres
“Avg/Rec”
button, the width of duct numbers and “W=” will be shown in the primary show.
• Press
“P/V/F”
button to select the next digit.
• Press
“Save/Clear”
to change the station of flashing digit and press
“Unit ”
or to
“Unit ”
change the flashing digit
from 0 to 9.
• Press
“Avg/Rec”
to store the new parameters in memory.
• If duct is circular, the diameter of duct numbers and “D=” will be shown in the primary show then select the duct diameter
that you want to use in the same way.