Tenma 72-8340, Инструкция по эксплуатации

Страница: 3 / 5

Front / Rear Panel Controls and Indicators
1.
POWER
– Master on/off selector
2.
INPUT POWER
jack – For connection of supplied AC power cord.
3.
FUSE HOLDER
– May be opened with screwdriver when power cord is removed.
4.
VOLT
– Output voltage adjustment
5.
CURR
– Current limit adjustment
6.
OUTPUT ON/OFF
– Activates supply output
7.
OUTPUT (+)
– Positive supply output (red)
8.
OUTPUT (GND)
– Chassis ground terminal (green)
9.
OUTPUT (–)
– Negative supply output (black)
10.
LCD isplay Panel
– Backlit panel shows CC/CV Mode, Output status, Voltage and Current output.
Operation
Ground Connection
Depending on the application, the power supply output terminals can be grounded to suit any one of the following conditions:
Negative Ground
– Black (-) negative terminal is tied to the green GND terminal.
Positive Ground
– Red (+) positive terminal is tied to the green GND terminal.
Floating Ground
– Green terminal is left open. Note that in this mode, high impedance leakage can exist between thepower
supply circuitry and the chassis ground.
Downloaded from Elcodis.com electronic components distributor