manualshive.com logo in svg

Tenma 72-7224, Руководство пользователя, Страница: 9 / 12

Поделиться
Скачать
Tenma 72-7224 Скачать руководство пользователя страница 9

9

FREQUENCY MEASUREMENT

DUTY CYCLE MEASUREMENT

• 

The duty cycle range is 0.1%~99.9%.

• 

To measure duty cycle, perform the following steps,

1. 

Insert the red test lead into the Hz Duty% 

 terminal and the black 

test lead into the COM terminal.

2.  Turn the rotary switch to Hz and press 

REL 

to select duty cycle measurement 

mode.

3.  Connect the test probes with the object 

being measured. The measured value 

shows on the display.

Note

: 

• 

When a measurement has been completed, 

disconnect the test probes from the circuit 

under test, and remove the test leads from the 

input terminals.

• 

The frequency ranges are 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz and 10MHz.

• 

To measure frequency, perform the following steps:

1. 

Insert the red test lead into the Hz Duty% 

 terminal and the black 

test lead into the COM terminal.

2.  Turn the rotary switch to 

Hz

.

3.  Connect the test probes with the object 

being measured. The measured value 

shows on the display.

Note:

 

• 

When a measurement has been completed, 

disconnect the test probes from the circuit under 

test, and remove the test leads from the input 

terminals.

Содержание 72-7224













Отзывы:

Нет отзывов