2
This meter is designed to meet IEC61010-1, 61010-2-032, and 61010-2-033 in
Pollution Degree 2, Measurement Category (CAT II 600V, CAT III 300V) and double
Insulation.
•
Do not operate the meter or use test leads if they appear damaged, or if the meter
is not operating properly.
•
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
•
Do not apply voltage between the COM and OHM terminals, while in the
resistance measuring state.
•
Do not measure current with the test leads inserted into the voltage or OHM
terminals.
•
To avoid electrical shock and personal injury, do not attempt to measure voltage
higher than 600V AC/DC, although the readings may be obtained.
•
Do not expose the instrument to direct sunlight, extreme temperature or humidity.
•
Before measuring current, check the fuses and turn the power to the circuit off
before connecting the meter to the circuit.
•
Disconnect circuit power and discharge all high voltage capacitors before testing
continuity. diode, resistance, capacitance or current.
•
Do not use the meter around explosive gas or vapour.
•
When using the test leads, keep your fingers behind the finger guards.
•
Remove test leads from the meter before opening the meter case or battery door.
•
Never operate the meter with the cover removed or the battery door open.
•
Use only the test leads supplied or the protection may be impaired.
•
Probe assemblies for mains measurements shall be rated as appropriate for
measurement category III according to IEC 61010-031 and shall have a voltage
RATING of at least the voltage of the circuit to be measured.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Remove dead batteries from the meter or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
Before replacing the battery, turn off the meter and disconnect all the test probes.
•
To prolong battery life turn off the meter after use.
SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
WHAT’S INCLUDED
•
Digital multimeter
•
User manual
•
Test lead
•
One 9V battery
•
Carrying bag