Communication
This meter provides communication capability, with the use of an
optional RS232 package and optically isolated cable and software.
Refer to the following procedure to set up the communication between
the meter and a personal computer.
1. Attache the appropriate end of the interface cable to the meter, with
the text side facing up. Connect the 9-pin connector to the
communications port of a personal computer. See the
Figure-27
.
2. Press "RS232" button to enable this interface. You will find that the
symbol of “
” is lit on the display.
3. Execute the software to take the data for your applications.
4.
Be sure to push the snap ends on the cable of meter side for
removing the cable.
The text side shall
be facing up.
of computer.
To COM1 or COM2
Push the snaps to
remove the cable.
Snap
Figure- 27. Cable Connection Of Communication
32