OPERATION
Data Hold
This data hold function allows the operator to freeze the display. To
enter this mode, press the "
HOLD
" pushbutton; press again to release.
Static Recording
™
Press the "
REC
" pushbutton for more than one second to enter the
static recording mode. The maximum and minimum readings are then
stored in memory. A beep tone is produced when a new tested value
has been recorded. Push the same button to cycle through the
maximum, minimum and average of the present readings. The
MAX
,
MIN
or
AVG
indicators will indicate what value is being displayed.
Whenever the "
MAX AVG MIN
" indicators appear on the LCD
simultaneously, the display reading is always a present value.
To exit this mode, press and hold the pushbutton for more than one
second.
Note:
1. Static recording captures only stable values and updates the memory;
it will not record any "
OL
" (overload) value for any of the
L/C/R
functions. In addition, the meter will not record which values are
below 50 counts in Capacitance measurement.
2. Static recording is only available in manual range. Activation while in
auto-range mode will automatically set meter to manual range and
cause calibration prompts to be displayed in the recommended
ranges.
25