Tenergy 59148, Руководство пользователя

Страница: 11 / 32

NOTE:
The auto turn-off function is automatically enabled when the T320 is
turned off and on again. Regardless of the previous settings, this
feature will be enabled when the device is powered off and on again.
USING YOUR UNIT
Manually overriding the auto turn-off function:
Auto turn-off function
To save energy and too prolong the battery life,
the T320 has equipped with an auto turn-off function
that is activated by default; that if the load of the AC
application(s) has been low enough for 5 minutes; the
T320 will auto turn itself off.
The auto turn-off function can be manually disabled.
To allow low applications that draw 3W or less to run,
follow these steps:
Press and hold BOTH DC power button and AC
power button for 3 seconds.
1
T320 will make 2 short beeps to indicate that auto
turn-off has been disabled. Then let go of your
fingers.
2
You can now use the T320 to power low wattage AC
applications without interruptions.
3
Reactivate auto turn off after manual over ride:
Auto turn-off function can be reactivated after a
manual over ride. To reactivate auto turn-off:
Press and hold BOTH DC power button and AC
power button for 3 seconds.
T320 will make 1 long beep to indicate that auto
turn-off has been reactivated. Then let go of your
fingers.
1
2
This power saving auto turn-off function is now
active again.
3
7