The battery indicator light while charging the unit
: the battery indicator light emits a light only if
the microcomputer is turned on.
-
red light indicates
– low voltage - the batteries need to be charged
-
flashes green light
– charging process
-
solid green light indicates
– the batteries are charged – end of charging process
8.2 Battery Exchange
To open the battery compartment, located at the back side of the microcomputer, unscrew 2
screws from the battery compartment cover.
Referring to the insert drawing, place the batteries into compartment.
Press 4 batteries into the battery compartment. MAKE SURE that the positive ends of the batteries
(marked “+“ are touching the springs (marked “+“) in the battery compartment.
Use the NiMH, AA size rechargeable batteries, 2000 - 2500 mAh.
If the batteries are located correctly in the battery compartment, after the microcomputer is turned
on, the battery control LED light is flashing.
If the microcomputer is turned on and the battery control LED is red (low battery power), the
batteries need to be charged.
It is possible to use the Power Analyzer even if the batteries are charging.
9. How use the system
9.1 ON / OFF, weight adjustment, rest time measurement
To turn on the power, press the ON/OFF button for 3 seconds, until you hear short beep.
When the power is turned on, the lower display will begin displaying weight.
To adjust the weight of barbell or weight stack, use Up/Down buttons.
(press and hold for fast
change)
After 10s of inactivity, the lower display begin displaying rest time (if rest time is turned on).
If the Eccentric Speed is turned on, upper display will begin displaying ECS.
18
