weight exercise set (different weight setting without resetting between weight change), all reps
will be compared with the absolute best repetition.
-
Up to 500 reps can be stored and retrieved from memory.
-
Reset button clears memory, recalls weight input.
4. What is measured and calculated
•
Average power measured in Watts [W]
– for full range of motion.
•
Partial average power measured in Watts [W]
– average power for limited (pre set) range of
motion from 0 to 100% of range of motion.
•
Peak power measured in Watts [W]
– the highest possible power in full range of motion. If the
value of Peak Power is over 9,999W, the microcomputer displays the value in kW (e.g.
10.35 = 10,350W)
•
Average velocity measured in meter per second [m/s]
– for full range of motion.
•
Peak velocity measured in meter per second [m/s]
– the highest possible speed.
•
Peak Force measured in Newtons [N]
– maximum force for limited (pre set) range of motion
motion from 0 to 100% of range of motion.
•
Microcomputer also measures
a rest time between reps or sets measured in seconds.
After
10 seconds of the rest time, the microcomputer shows time from the last repetition or set.
•
Eccentric average velocity
(average velocity in downward movement) measured in meter per
second [m/s]
•
Rest Time
and
Eccentric Velocity
can be turn on or turn off in setting mode.
5. Sensor’s range of motion
Durable Kevlar cord, 2.7 meters (8.85’) long.
Length of string makes it applicable for almost any power or Olympic lift and all vertical jumping
applications.
6. Microcomputer Setup
6.1 ON / OFF
To turn the power on or off, press the ON/OFF button for 3 seconds, until you hear a short beep.
10
