background image

Tendercare Ltd

The Snugseat Spring User Manual

Document No 034-01v4 Snugseat Spring

User Manual.doc

Authority.

Quality Controller

Authorised.

J Adams

Page 21

Dec 05

9.1 Routine maintenance

The users family can easily carry out the following tasks. No tools are required.

1) Always wipe the buggy and seat dry. Never put it away damp.

2) Check that the two-footrest retaining thumbscrews are in place and are hand tight (daily).

3) Check that the two pommel retaining thumbscrews are in place and are hand tight (daily).

4) Check operation of the brake, folding and reclining mechanisms (weekly).

5) Check condition of harness, stitching and buckle (weekly).

6) Clean frame when necessary (we suggest at least once a week).

If you find any faults refer to your issuing authority or Tendercare Ltd.

9.2 Six monthly maintenance

Only someone who is a competent tradesman or repairer should carry out this work. If a
major fault is found stop using the Snugseat until it has been corrected.

1) Fold and open the buggy. Check that all movements through the folding range are free.

Examine frame for any damage. Check operation of the seat recline mechanism.

2) Examine upholstery and foot straps for wear and arrange for replacement if necessary.

3) Examine nuts, bolts, pivots and frame plugs for tightness and general condition.

4) Check that the footrest and pommel retaining thumbscrews are in place and are hand tight.

5) Examine brake assembly for wear, damage and correct operation.

6) Examine tyres for sharp objects, cuts or splits.

7) Examine castor and wheel bearings and suspension for excessive wear.

8) Check castors and rear wheels for free rotation, security and accumulation of fluff and grit.

Remove with a dry lint free cloth.

9) Check the two plastic rollers on the front of the seat locate properly into the two retaining

brackets on the front of the buggy and that there is no wear or damage.

10) Check the chrome locking lever and mountings for wear or damage and correct operation.

11) Check the safety strap, clips and mounting for damage or wear.

For all other repairs refer to your issuing authority or Tendercare Ltd.

Содержание Mobility Junior Snugseat Spring





























Отзывы: