11N Wireless Broadband Router
the Wireless MAC address of the connecting device into
the Router's AP MAC address table or select one from
the scanning table.
Repeater Mode
：
In this mode, add the opposing MAC
address into their individual AP MAC address table by
manual or scanning to enlarge and extend the wireless
radio.
Encrypt Type: Select one from WEP, TKIP, or AES for
security here.
Pass phrase: Enter the encrypted key for wireless
devices.
AP MAC: Input the MAC address of another (opposing)
wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep
the same bandwidth, channel number, and
security settings. Apply the settings and reboot
the router to activate it.
6.6 Wireless Access Control
To secure your wireless LAN, the wireless access control is
actually based on the MAC address management to allow or
block the specific clients to access the wireless network.
Select “Wireless Setting->Access Control” to display the
following screen:
38
