Wireless Broadband Router User’s Guide
Remote WEB Manager
This section is to set the WEB
managing port and set the IP address
in WAN which is allowed to execute
remote WEB manager function.
1. Enable: Enable remote WEB
manager function.
2. IP Address: The IP address in
WAN which is allowed to execute
remote WEB managing function.
3. Port: The port through which the
computer in WAN execute remote
WEB
manager function.
Note:
1. The default port through which
the computer in WAN is able to
execute remote WEB managing
function is 80. If you change the
port (take 8080 for example), you
should type
http://192.168.1.2:8080
to go to the WEB management
interface.
2. The default IP which is allowed to
execute remote WEB managing
function is 0.0.0.0. Under this
default situation, all the computers
42
