Wireless Broadband Router User’s Guide
1.
Click “Filter Out” or “Accept”.
When you click “Filter Out”, you are
only forbidding the host in LAN with
the corresponding IP address to go
through the router by the
corresponding port. When you click
“Accept”, you are only allowing the
host in LAN with the corresponding
IP address to go through the router by
the corresponding port.
3. IP: Please fill in the IP address of
the controlled computer in the LAN.
You are able to use a range of IP
addresses.
4. Port: Please fill in the TCP/UDP
protocol port that you require to
control, you can set a range of IP
addresses.
5. Type: Select the protocol of data
packet controlled (All means TCP/
UDP both included).
6. Time: Please fill in the time when
this rule goes into effect and goes out
of effect.
7. Enable: This filter rule functions.
8. Save: Click to finish and save
setting.
For example, if you require
forbidding the computer (IP address
37
