54Mbps Wireless Long Range Wireless AP
3 MAC Address of the AP which is connected remotely: Please fill in
the MAC Address of remote connected APs (This MAC Address can be
obtained by scanning or copying. Or you can fill in the MAC Address
manually, at most 6 groups of MAC Address are supported);
MAC Address of AP1: Fill in the MAC Address of remote AP1;
MAC Address of AP2: Fill in the MAC Address of remote AP2;
MAC Address of AP3: Fill in the MAC Address of remote AP3;
MAC Address of AP4: Fill in the MAC Address of remote AP4;
MAC Address of AP5: Fill in the MAC Address of remote AP5;
MAC Address of AP6: Fill in the MAC Address of remote AP6;
4
Security Setting:
Please select the wireless encryption mode, P2P
Bridge Mode only supports WEP mode (Note: when you select the
disable mode, security mode is invalid.)
Please click “Finish” when you finished above settings.
4.2.3.2 Deployment
P2MP Bridging Mode enables you to connect several wired Ethernet LANs
through wireless AP without using wired cables, this function can be
deployed in the environments where wireless communication is required but
it is not convenient to lay out cables in the environment. Note: The root AP
must be set as P2MP mode, other remote APs (at most 6 units) must be set
as P2P mode.
Figure 15
16
