Tenco 900-01201-000, Руководство пользователя

Страница: 7 / 35

CHAPTER 4
GENERAL SAFETY INDICATIONS
This manual is an integral part of the machine and must accompany it throughout its life. Before performing any
operation, read each and every part of this manual carefully.
The company cannot be held responsible for property damage, injuries or damage to the machine itself due to non-
compliance with the instructions found herein.
The machine must be installed in good workmanlike manner and only by qualified personnel.
The operating personnel must receive adequate training in use of the machine and must be in good psychological and
physical condition and must not be under the influence of alcohol, drugs or medications that reduce alertness.
The operator must be aware of the dangers derived from use of the machine.
4.01 Pictograms
The safety-related pictograms posted on the machine (when required) and their meanings are reported below. If
the pictograms become illegible, they must be replaced (under the customer's responsibility).
Danger due to a voltage of 230V
Do not use water to put out fires – use the forms of extinguishing indicated in the
standards
Danger related to transport; follow the instructions given in the manual; indication of
the machine centre of gravity, to be used when positioning the forks of the transport
forklift truck
Danger of pinching/crushing limbs