Tenco 900-01201-000, Руководство пользователя

Страница: 34 / 35

CHAPTER 11
TROUBLESHOOTING
01. T
HE LABEL IS NOT CENTERED VS
.
SPOT ON THE CONTAINER
-
Use the potentiometer 1 on the control panel, ref. photo 7.7
02. A
S IT MOVES OVER THE PATH
,
THE PAPER TENDS TO LOOSEN
-
Check that the tensioning sponge C scheme 1 is set against the path bushing.
-
Check that the label is 3-4 mm out of the blade (photo 9.10)
03. T
HE PAPER BREAKS AS IT WINDS ALONG ITS PATH
-
Check that the plastic paper driving bushing doesn’t fray the paper
-
Check the paper winding path (scheme 1)
04. W
RINKLES ON THE RIGHT SIDE OF THE LABEL
-
The most likely cause is that the glass in the container is warped; replace the pressing roller C (photo 9.1)
with a roller of a more solid material (rubber).