Ten-Tec SSB-CW-AM, Инструкция по эксплуатации

Страница: 80 / 135

Install these mylar film capacitors:
6-1. Capacitor
&ȝ)
(marked 222).
6-2. Capacitor
&DOVRȝ)
6-3. Capacitor &ȝ)PDUNHG
Install these ceramic disc capacitors:
6-4. Capacitor C94, 20 pF.
6-5. Capacitor C95, 20 pF.
6-6. Capacitor C70, 47 pF.
6-7 Capacitor C73, 47 pF.
6-8. Capacitor C71, 180 pF (marked 181).
6-9. Capacitor C72, also 180 pF.
6-10. Capacitor C69,
ȝ)
(marked 104).
6-11. Install resistor R72 220 ohms (red-red-brown).
6-12. Carefully identify PIN diode D13, type BA479G (clear
glass body, red cathode band, middle green band) and install
with correct cathode polarity.
6-13. Install diode D14, also type BA479G per 6-12.
Install the following molded inductors:
6-14.
/ȝ+
(orange-white-silver-gold).
6-15. /DOVRȝ+
6-16.
/ȝ+
(green-blue-silver-gold)
6-17
/ȝ+
(blue-gray-gold-gold).
6-18. /ȝ+ (brown-black-brown-gold).
6-19. After carefully double-checking the parts just installed
for correct values, install a shield enclosure, soldering all four
mounting tabs. It is not necessary to bend these tabs before
soldering. No top cover is used on this shield or on the 1st
Mixer section to be built next.
REMINDER: Handle the board carefully to prevent damage to the
mounting lugs of the Volume and Clarifier controls.
1254 - Assembly - 59