Ten-Haaft Premium OYSTER 65 Скачать руководство пользователя страница 16

30

31

3. OPERATING THE "OYSTER

®

 TV"

TROUBLESHOOTING SATELLITE SETUP (DVB-S)

1.   No channels were found, and the signal and quality display show only low or no values at all.

 

 Check all cables between TV and LNB. Make sure that the antenna is aimed at the right satellite and that the 
view is not obstructed by trees or other obstacles.

2.   Not all or the wrong channels were found during the search.

   Make sure that the antenna is aimed at the correct satellite and that this satellite is set up in the menu.

3.  Block-shaped image distortion or audio dropouts during playback.

 

 Check the "Channel" menu for signal loss and quality. Even a minor antenna misalignment can cause a major 
loss of reception performance. Mind that the cable should not be too long. Note that different satellites may 
require an antenna of a different size.

4.  Signal loss at light rain or snow. 

   This issue is usually caused by an insufficient signal. Check the aiming of the antenna and its size.

5.  Signal is lost during windy periods. 

   Check the antenna for secure attachment. It should not move. Make sure that no obstacles such as trees 

obstruct the antenna's view.

6.  Subtitle and audio track are in the wrong language. 

  Check the language settings in the menu.

7.  Adding a new channel that is not found via the scan

  You need to add a new transponder. Observe the information in the corresponding part of this manual.

EDIT CHANNELS (SATELLITE TV MODE)

Press 

SETUP

 to open the menu and select "Channel". Select "Channel Edit". Press 

 

 or 

PAGE+

 

PAGE-

 to select a 

channel. Use the colour buttons to choose the following settings:

Red

Press 

RED

 to delete a channel. Use 

 

 to select it. Press 

OK

 to delete the channel selected.

Yellow

Use 

YELLOW

 to move channels. Use 

 

 to move the channel selected to a position of your choice. Press 

OK

 to 

permanently store the channel at this new position.

Blue

If you wish to skip a channel when zapping, select this channel and press 

BLUE

. The channel can now only be 

accessed directly by entering the corresponding number.

Green

Press 

GREEN

 to delete the entire channel list. 

Caution! The system may then no longer be able to find a satellite!

EDITING CHANNELS (DIGITAL TV MODE)

Press 

 

 or 

PAGE+

 

PAGE-

 to select a channel. Use the colour buttons to choose the following settings:

Red

Press 

RED

 to delete a channel. Use 

 

 to select it. Press 

OK

 to delete the channel selected.

Yellow

Use 

YELLOW

 to move channels. Use 

 

 to move the channel selected to a position of your choice. Press 

OK

 to 

permanently store the channel at this new position.

Blue

If you wish to skip a channel when zapping, select this channel and press 

BLUE

. The channel can now only be 

accessed directly by entering the corresponding number.

FAV

Press 

FAV

 to add a channel to the DVB-T Favourites list.

3. OPERATING THE "OYSTER

®

 TV"

Содержание Premium OYSTER 65




























Отзывы: