1wddfdfasdfsfs
STEP 4.
1. After fitting the support
brackets your bedstead is now
ready for the two bottom panels.
2. This will take two people to position
safely and to avoid any risk of damage.
STEP 5.
1. With each person standing either side of the bed
slide the bottom panels down between the hinges
and support bracket.The bottom panels will rest on
their plastic feet.
2. Slide the panel all the way to the head end of the
bed to give enough room for the second panel.
3. Again using two people, angle the panel
downwards and slot between the hinges and
support brackets.
4. Slide the panel all the way to the foot end .
