.16.
INSTRUCTION MANUAL
and 12-20
ºC
(54-68
ºF
) for the bottom zone.
•
Touch the mark
to increase the set temperature by 1
ºC (or by 1ºF)
. On the
contrary, touch the mark
to decrease the set temperature by 1
ºC
(or by 1ºF).
For Single Zone STZ60SB and STZ60SX
o The range of temperature is 5-20 ºC (41-68 ºF);
o Make sure the Control Panel is under unlocked condition;
o The digital
will start to flash and show the previous set temperature for the
first press of Temperature Plus or Minus button;
o When the digital is flashing, press the Temperature Plus Button once,
the digital
will be increased by 1°C/1°F with a sound of beep;
o When the digital
is flashing, press the Temperature Minus
Button once, the set temperature will be decreased by 1°C/1°F with a
sound of beep;
o When the digital shows the desired temperature, leave all buttons no touching
about 5 seconds, your setting will be saved with a sound of beep, the digital
will not flash and start to show the set temperature inside of the cabinet .
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Dual Zone
Includes STX30DRB,STX30DS,STX60DRB,STX60DS,ST180DRB, ST180DS
When the control panel is unlocked, directly touch the mark
, you can interchange
the Fahrenheit and Celsius display for both zones at the same time.
For Single Zone STZ60SB and STZ60SX
o To switch
ºC
to
ºF
, press the button
once, the mark
will light on
on the display window, the mark
will light off at the same time;
o The button can be pressed whatever the control panel is locked or
unlocked;
o Your setting will be saved as new default temperature scale unless to re-
set it.
