BEFORE
YOU
BEGIN
10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY
STEP
BOLT (A)
SPRING WASHER (B)
WASHER (C)
NUT (D)
BOLT (E)
WASHER (F)
BOLT (A)
Qty: 2
BOLT (E)
Qty: 2
SPRING WASHER (B)
Qty: 2
WASHER (F)
Qty: 2
WASHER (C)
Qty: 2
NUT (D)
Qty: 2
HARDWARE BAG FOR STEP CONTENTS :
A) Open
HARDWARE BAG FOR STEP 4.
F) Slide the
TOP CAP
through the
MAST
. Carefully pull console wires through the
CONSOLE MAST.
Attach the
CONSOLE WIRES
to the pre-attached routing wire. Discard wire when finished.
G) Attach the
CONSOLE MAST
using 2
BOLTS (A)
, 2
SPRING WASHERS (B),
2
WASHERS (C)
, 2
NUTS (D),
2
BOLTS (E)
and 2
WASHERS (F)
.
H) Snap the
TOP CAP
into place.
RESISTANCE
KNOB
TENSION WIRE
RESISTANCE
KNOB BRACKET
TENSION
CABLE
TOP KEY HOLE
BOTTOM KEY HOLE
PRE-ATTACHED SCREWS
920B CONSOLE
A) Pull
TENSION CABLE
out from square hole in console mast.
B) Turn
RESISTANCE KNOB
to highest resistance setting. Place the
TENSION WIRE
into the
BOTTOM KEY HOLE
on the
RESISTANCE KNOB BRACKET
.
C) While holding the
RESISTANCE KNOB BRACKET
, pull the
RESISTANCE KNOB
up to slide it into the
TOP KEY HOLE
position on the
RESISTANCE KNOB BRACKET
.
D) Once the
TENSION WIRE
is in position, turn the
RESISTANCE KNOB
to the lowest resistance setting.
E) Slide
RESISTANCE KNOB & BRACKET
into the
CONSOLE MAST
and attach using
PRE-INSTALLED
BOLT & WASHER
.
910B ONLY
Содержание 910B
Страница 1: ...BIKE USER S GUIDE FOR MODEL 910B 920B ...
Страница 2: ......
