Tempish IGNIS 125, Инструкция по эксплуатации

Страница: 12 / 18

UK
Instructions for miniscooters IGNIS
Please read carefully the instructions for the use of miniscooter. Proper use will significantly extend the life of the individual parts of miniscooter and increase driving safety. Thank you for
your confidence, which you gave us in purchasing miniscooter and we wish you many pleasant experience while riding a miniscooter.
Read the instructions on the use of mini scooter.
Before use the parts of miniscooter have to be put together safely.
Footplate: Aluminum
head: Aluminum
Handlebar: aluminum
Fork: Steel
Wheels: PU
Load: IGNIS 125 - 100 kg, IGNIS 145 - 100 kg, IGNIS 200 - 100 kg, IGNIS 200 FLEX - 100 kg, IGNIS 230 - 100 kg
IEC, EN 14619
Instructions for putting on the mini scooter.
Loosen the screw on the quick folding mechanism, pull the lever, pull the fuse and telescopic handlebar rod into a working position, so lock snaps. Make sure that relative position of the
handlebars is correct and tighten the motherboard by Quick Release screw.
Loosen the quick release telescopic rod bolt handlebar; slide the handlebar to the desired height corresponding to the size of character riders. In the extreme (highest) position, the
handlebars are secured by fuse. When driving the handlebars can’t be t in any case ejected into extreme position. After setting the desired height of handlebar tighten the quick screw
securely.
Insert the right and the left handlebar grip into the pipe so that the fuses click.
Instructions for recovering the composition mini scooter.
When putting together the mini Scooter do tasks in reverse order as when composing. Fuses will be loosen by roding into the tube.
Instructions for assembly of the TEMPISH IGNIS 200 AL FLEX miniscooter.
1. Pull the flip mechanism lock towards the handlebars, set the handle bar to the operative position (upright to the scooter board) until the fuse engages in the gap. To ensure the relative
position of the handlebars and the base plate, make sure that the fuse snaps into the opening of the flip mechanism.
2. Loosen the quick-release screw of the telescopic handle bar, slide the handlebars to the desired height corresponding to the size of the rider’s character. In the extreme (highest)
position, the handlebars are secured.
Instructions for disassembly of the TEMPISH IGNIS 200 AL FLEX miniscooter.
When composing a mini scooter, perform the operations in the reverse order of composing.
Basic instructions for using the mini scooter.
1. Always check before the race tightening of both quick-screws, and all bolted connections. (Wheels must be free.) For any damage of self-fixing screw or accessories is needed replacement.
Don’t ride with damage of this component! Don’t the braking mechanism – it has high temperature when braking! You can brake by stepping with foot on the fender of the rear wheels. When