Tempest Leader SMOKE 3, Руководство пользователя

Страница: 15 / 24

15
8.3 Setting continuous operation
At power up the machine will automatically heat to its operating temperature.
When the operating temperature is reached the display will show
“READY”.
To set continuous operation, adjust output level to desired value and press
“SMOKE”
button.
Whilst the unit is producing smoke the screen will display
“Continuous xx%”
to indicate its mode and output level.
The unit will continuously produce smoke until the “SMOKE” button is pressed
again or the fluid supply is exhausted (whichever is sooner).
8.4 Setting the Timer
Use the timer button to toggle between
“runtime”
and “offtime”
.
To enable the run timer function, set a non-zero value to the runtime using the timer
UP/DOWN buttons.
When runtime is zero the runtime is shown as
“OFF”
, indicating the
timers will not run.
To Select the off timer value, set a non-zero value to the offtime.
To engage the timer press the
“SMOKE”
button with a programmed runtime
value.
Whilst the unit is producing smoke the screen will display
“Timer xx%”
to indicate its mode and output level.
The machine will begin a cycle of producing fog for the programmed runtime and stopping
production for the programmed offtime until the
“SMOKE”
button is pressed again of the fluid supply is depleted (whichever is sooner).
READY 00%
CONTINUOUS 00%
FOG LEVEL 00%
RUN TIME 03
RUN TIME 00
RUN TIME
OFF