Tempest Leader SMOKE 3, Руководство пользователя

Страница: 12 / 24

12
6 INSTALLATION AND SETTING UP
DANGER! DO NOT operate the machine until you have read and observed all
the precautions listed under “Safety information” on page 4.
6.1 Location
The Trainer LEADER range of machines are designed to be located on the floor or any
surface suitable to support their weight. The machine can operate in any orientation from 45
degrees upwards to 45 degrees downwards. Steeper tilting may cause fluid leakage.
Ensure that there is at least 100mm (4 in.) clearance all-round the machine and at least
600mm (24 in.) in front of the fog output.
7 AC POWER
Before using the machine, ensure that a grounding-type (earthed) power plug that fits the
local power outlets is installed on the power cable provided.
DANGER! Make sure the power plug is correctly rated:
For UE LEADER Smoke 3 and LEADER Smoke 5 models use a plug rated at 10 A
minimum.
When installing the plug, follow the plug manufacturer’s instructions and connect pins
as follows:
Yellow and green wire to ground (earth), blue wire to neutral and brown wire to live.
The table below shows some common pin identification schemes.
Before connecting the machine to power, verify that the AC supply is adequately
dimensioned for the current draw of the machine.
LEADER Smoke 3 1200 W, 5.3 A / 240 V (EU)
1050 W, 8.75 A / 110 V
LEADER Smoke 5 2100 W, 9.2 A / 240 V (EU)
1800 W, 15 A / 110 V
Check that the local AC voltage is appropriate, as indicated on the machine’s serial number
label. If your AC voltage is outside the appropriate range, do not use the machine.
Contact
LEADER for assistance.
Wire Function Marking Screw colour
Brown Live « L » Yellow or Brass
Blue Neutral « N » Silver
Green/Yellow Earth Green