Temperature@lert TM-WIFI220, Руководство пользователя

Страница: 30 / 42

29 |
Rev 2.1 for firmware 5.0+ | http://www.temperaturealert.com/ | © 2011 Temperature@lert
Units – Choose whether you want your temperature readings and alerts in
degrees Fahrenheit or degrees Celsius.
Reading Interval – Set the amount of time between sensor readings. The
minimum is 1 minute.
Enable Continuous Alert – Once the sensor falls outside your threshold, the
device will send you an email alert. After the number of minutes specified in
the reading interval settings has passed, if the sensor is still outside of your
acceptable limits, enabling the continuous alert will send you another message
until the sensor comes back within range.
Note: The device will always send
an alert when the sensor comes back within range regardless of how the
continuous alert setting is configured.
HTTP Server Port - The default is 80. This should only be changed if needed by
an IT administrator for port forwarding from your router or other security
reasons.
Date/Time – The device automatically sets the date/time once it has an
Internet connection. You should not need to use this field.
Time Zone – Use this to specify the time zone for the device.
NTP Servers – By default, the NTP servers listed will automatically synchronize
the time of the unit if Internet access is available. Alternatively, you can list
your own NTP servers here.
Device Password – If you wish to change the password of your device from the
default, enter the new password and click ‘Save’.