Page 4 of 4
Function of Solder Gaps J14–J15
J14
J15
Function
Short Open
Positive setting
Open Open
Positive and negative setting
Open Short
Negative setting
Control Mode
box
4
1
= On - Off (used for valves and solenoids)
2
= Proportional(common for electric heaters)
Output 2
box
6
0
= Not Available
Signal Input
box
2
1
= Thermocouple: Type J
2
= Thermocouple: Type K
3
= RTD: 100 ohm PT, DIN 0.00385
4
= RTD: 100 ohm PT, JIS 0.00392
9
= Other
Power Input
box
1
4
= 90-264 VAC 50/60 Hz
Output 1
box
5
1
= Relay: 5A / 240 VAC
2
= Pulse dc for SSR drive: 20 VDC (20 mA max)
3
= 4-20 mA, linear (max load 500 ohms)
4
= 0-20 mA, linear (max load 500 ohms)
5
= 0-10 VDC, linear (min. impedance 500K ohms)
9
= Other
TEC-805-
1
2
6
0
3
4
5
7
8
0
Communication
box
8
0
= Not Available
Alarm
box
7
0
= None
1
= Relay: 2A / 240 VAC
Deviation alarm
Ordering Code:
Range code
box
3
X
= 0 to 499°F
C
= 0 to 299°C
V
= 0 to 999°F
E
= 0 to 499°C
W
= 0 to 1999°F
H
= 0 to 999°C
Other ranges are available for large volume
orders. Consult Tempco for more information.
J12
J13 Cycle time
Function
Short Short
20 sec.
Relay output
Open Short
1 sec.
SSR drive
Open Open
0.02 sec.
Linear current or voltage output
Location Short Open
Function
J1
x
T/C type J or K
“
x
PT100 ohms DIN or JIS
J2
x
Reverse control
“
x
Direct control
J3
x
100°C span
J4
x
200°C span
J5
x
300°C span
J6
x
400°C span
J7
x
460°C span
J8
x
600°C span
J9
x
800°C span
J10
x
1200°C span
J11
x
ON-OFF control
“
x
Time proportional control
Function of Solder Gaps J12–J13
Function of Solder Gaps J1–J11
WARRANTY
Tempco Electric Heater Corporation is pleased to offer
suggestions on the use of its products. However, Tempco makes
no warranties or representations of any sort regarding the fitness
for use, or the application of its products by the Purchaser. The
selection, application, or use of Tempco products is the
Purchaser's responsibility. No claims will be allowed for any
damages or losses, whether direct, indirect, incidental, special, or
consequential. Specifications are subject to change without
notice. In addition, Tempco reserves the right to make changes–
without notification to the Purchaser–to materials or processing
that do not affect compliance with any applicable specification.
TEC Temperature Controllers are warranted to be free from
defects in material and workmanship for two (2) years after
delivery to the first purchaser for use. Tempco's sole
responsibility under this warranty, at Tempco's option, is limited
to replacement or repair, free of charge, or refund of purchase
price within the warranty period specified. This warranty does not
apply to damage resulting from transportation, alteration, misuse,
or abuse.
RETURNS
No product returns can be accepted without a completed Return
Material Authorization (RMA) form.
TECHNICAL SUPPORT
Technical questions and troubleshooting help is available from
Tempco. When calling or writing please give as much
background information on the application or process as possible.
TEMPCO
Electric Heater Corporation
607 N. Central Avenue
Wood Dale, IL 60191-1452 USA
E-mail: [email protected]
Phone: 630-350-2252 Toll Free: 800-323-6859
Web: Tempco.com
