Tempco PCM10001, Инструкция по эксплуатации

Страница: 1 / 10

Part Number Input Voltage Max. Heater Maximum Thermocouple
(50/60 Hz) Amperage Fusing Wattage Sensor Input
PCM10001 120VAC 16 20amps 1920 Type J
PCM10002 240VAC 16 20amps 3840 Type J
PCM10003 120VAC 16 20amps 1920 Type K
PCM10004 240VAC 16 20amps 3840 Type K
Page 1 of 10
TEMPCO
Electric Heater Corporation
607 N. Central Avenue
◆
Wood Dale, IL 60191-1452 USA
◆
630.350.2252
◆
Fax: 630.350.0232
E-mail: info@tempco.com
◆
Web: www.tempco.com
Visionary Solutions for Industry
®
Since 1972 —
ISO 9001 Certified
Temperature Controllers & Sensors
◆
Heating Elements
◆
Process Heating Systems
®
®
Instructions for Tempco Control Enclosure PCM10001 through PCM10004
© 2016 Tempco Electric Heater Corporation (Revision 6/15/2016)
1: TEC-9100 Controller
2: On-Off Switch
3: 1 Amp Control Fuse
4: 20 Amp Main Fuse (240V model has 2)
5: 120V or 240V Power Cord (20A)
6: 120V or 240V Heater Receptacle (20A)
7: Type J or K Thermocouple Jack
WARNINGS
1. Dangerous voltage capable of causing injury or death is present within this enclosure. Power to all
equipment must be disconnected before installation or beginning any troubleshooting procedures.
All wiring and component replacement must be made by qualified personnel only.
2. To minimize the possibility of fire or shock, do not expose this console to rain or excessive moisture.
3. Do not use this enclosure in areas where hazardous conditions exist such as excessive shock, vibration,
dirt, corrosive gases, oil or where explosive gases or vapors are present.
Temperature Controller:
Model TEC-9100, 1/16 DIN, Dual Display with PID Auto-tuning
Main Power Switch:
Located on Front Panel
4.00"
6.75"
1
4
5
2
3
7
6
20A-FAST 1A-FAST