24
Temco DV5200, DV6400 Series
77531
T202
Fig. 31 Louvre in place.
Log Installation
Attention: Glass door should be removed when
installing logset and prior to lighting the unit.
1. Remove glass door (Refer to “Glass Door Removal
Procedure”)
2. Remove logs from carton and inspect. Refer to
Figures 32 and 34.
3. Rear log should be installed onto rear log supports.
Match up slots on rear of log with the vertical log
bracket tabs.
4. The center log should be placed on the center log
supports, slots aligned with tabs, and log placed
rearward.
5. Top twigs can then be placed in their designated
positions provided with pins on back logs, and
grooves on the center log. The two outside twigs
provided on the DV6400 models rest on top of the
ends of the grate. They are located and supported
by the wire formed brackets extending up from the
firebox base. (Fig. 34)
TL121
Fig. 32 Correct log placement for DV5200.
Log
Support
Bracket
Slot
TL122
Fig. 33 DV5200 logs, side view.
TL123
Fig. 34 Correct log placement for DV6400. NOTE: Do not
place side logs inside the flame.
Slot
Bracket
TL124
NOTE: Side logs
are not shown.
Fig. 35 DV6400 logs, side view.
Slot
Bracket
