TEMA TELECOMUNICAZIONI
AD630VoIP SIP 25W / PoE Horn
MAS-AD630-REV02EN
Page 20 of 48
9.3. Network parameters
On this page it is possible to set the network parameters, such as IP address, netmask, etc.:
The default IP address of the device is
192.168.0.10
. Gateway and DNS are only needed if you want the device to
have the ability to access the Internet (for example to get the current date / time, in the example from the site
time.nist.gov).
The changes to the network settings are taken over by the device until the next reboot. Once you have completed
the configuration steps so be sure to reboot the system and if necessary, change the network segment of your
computer so that it can connect to the new address.
•
IP address
: specify the IP address you want to assign to AD630.
•
Subnet mask
: indicate the subnet mask to be assigned to AD630.
•
Default gateway
: indicate the gateway that can enable AD630 to access to internet.
•
Primary and secondary DNS server
: indicate the addresses of two DNS servers you want to use to resolve
IP addresses.
•
Time server
: indicate the address of the server you want to use for time synchronization device.
•
Test address (ping)
: if inserted, this address is used by the system to verify the correct operation of the
network connection.
•
SMTP server
: name or IP address of the mail server.
•
Port
: TCP port for the connection. Usually is 25
•
User
: authenticated user on the SMTP server
•
Password
: SMTP authentication password
•
TLS connection
: activate the secure connection
•
Destination
: email destination
•
Text message
: text to be included in the email sent
The button “Test Mail” can be used to test immediately if the configuration works.