TEMA TELECOMUNICAZIONI
IP PoE Multicast Encoder
AD615/S
MAS-AD615-S-REV00EN
Page 17 of 23
8.5. General parameters
In this section it is possible to set parameters for general use, such as call duration, audio volume, tones, ringing
and so on:
The only parameter to be programmed in this window is the choice of the outgoing audio codec (field:
Outgoing audio stream codec). This parameter set the codec to be used when streaming the input digitized audio
signal. The parameter also set the codec that will automatically use the AD600 series devices into the network. In
the receiving devices it is not necessary to program the codec type set into AD615/S since the detection will be
automatic. The rest of the fields are ignored by AD615/S.
It is possible to choose between G711 (the lowest) quality and L16 at 32kHz (the highest) quality. Obviously a best
quality matches a greater bandwidth.
The selected codec in AD615/S in the above window will be the same for the background music stream as well as
for the stream output of a voice announcement from the microphone.
