Telycam NDI HX3, Руководство пользователя

Страница: 17 / 58

〓〓
IR REMOTE CONTROLLER
〓〓
— 13 —
POWER
Short press POWER key to enter standby mode from
normal working mode. Press it again, the camera will do
self-checking, then go back to HOME position. It will go
to preset position if power on mode has been set before.
FREEZE
Short press FREEZE key to freeze/unfreeze the image.
IRT (IR Transfer/IR Pass)
Open/Close the IR pass function. Once press the IRT key,
the camera will receive and pass the IR remote control
signal to the codec/terminal.(via VISCA IN port)
Set 1 ~ Set 4 ADDRESS SETTING
Long press for 3 seconds until the key light ON, to set
camera address.
CAM1 ~ CAM4
（
CAMERA SELETING
）
Short press to select the relative camera.
NUMBER KEY (1-9)
Set Preset
：
Long press the number key (3 seconds) to set preset.
Run Preset
：
Short press the number key to run preset.