SX4e CDMA 800 • SX4e CDMA 1900
6
Technical Manual
PHONECELL SX4e OPERATION
How to Use the LED Status Indicators
1) Power-on the unit (see the
Connect Your Phonecell to AC
Power
section of this manual).
2) The LED indicators on the front
of the SX4D will turn ON. The
following tables describe the
modes and operation of the
indicators -
See Figure 8.
How to Place a Call
1) Pick up the handset and listen for a dial tone.
2) Dial the phone number.
NOTE:
If service is not available, a No-Service tone (fast beep) is produced and the Received
Signal Strength Indicator LED is off. Hang up and try the call again. If the No-Service tone continues
and the RSSI LED remains off, contact your service provider to verify that cellular service is available.
Battery Status Indicator LED
LED Color
LED Activity
Description
GREEN
Continuous
Battery is fully charged or supplying power
RED
Continuous
Battery is being charged
NONE (DARK)
Off
Battery is not installed
YELLOW/RED
Blinking
Low battery warning
Received Signal Strength Indicator LED
LED Color
LED Activity
Description
GREEN
Continuous
Best cellular signal strength
YELLOW
Continuous
Good cellular signal strength
RED
Continuous
Poor cellular signal strength
NONE (DARK)
Off
No cellular service
RED
Blinking
Incoming Call
AC Power Status Indicator LED
LED Color
LED Activity
Description
GREEN
Continuous
FWT Power ON
GREEN
Continuous
No FWT Power
Voice Message Status Indicator LED
LED Color
LED Activity
Description
GREEN
Continuous
You have voice mail. (Contact your service
provider to activate message service)
GREEN
Continuous
Normal operation without any voice mail messages
Figure 8 – SX4e LED Indicators.
Received Signal
Strength Indicator
(RSSI)
Power LED
Battery LED
Message LED
