Teltonika WRP100, Руководство пользователя

Страница: 9 / 18

9
7. If LED becomes yellow instead of green it means that connection to selected network has failed. Try again
starting from
step 3 and verify that you are entering correct password.
8. If you want to change the network that is being repeater press and hold the button on the device for 5 seconds.
After the LED becomes yellow again start configuration from
step 3 .
Connecting to RUT500
WRP100 is designed for simple connection to Teltonika’s RUT500 series 3G routers. To connect WRP100 to RUT500
follow these steps:
1. Power up the device
2. Wait for yellow LED to stop blinking
3. Press the button on WRP100
4. Wait for green LED to light up
States of the device
These states of WRP100 wireless repeater can be judged from the status LEDs of the device
State LED Comment
Booting YELLOW blinking Device is powering up
Ready for configuration YELLOW
Device is ready to be configured. Connect to Wi-Fi
network
WRP100_Teltonika for configuration
Connecting to AP GREEN blinking Device is connecting to configured AP
Connected GREEN
Device is connected and is repeating Wi-Fi network
of the selected AP
Not connected RED Device can’t connect to the selected AP
Connecting to RUT500 GREEN and RED blinking Device is making quick connection to RUT500
Restoring defaults RED blinking Device is restoring factory defaults
Note : the states of status LEDs during the first 15 seconds after supplying power to the device should be ignored.