Teltonika TST100, Быстрое руководство

Страница: 12 / 14

12
TST100 | Wiki
Safety information
This message contains information on how to operate TST100 safely. By
following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and
follow them strictly before operating the device!

The device uses SELV limited power source. The nominal voltage is
+42 V DC. The allowed voltage range is +8..+50 V DC.

To avoid mechanical damage, it is advised to transport the device in
an impact-proof package.
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, DO NOT touch the device
before unplugging the power supply.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in a predefined
location.
The programming must be performed using a PC with
autonomic power supply.
Installation and/or handling during a lightning storm
is prohibited.
The device is susceptible to water and humidity if the
device housing is not properly closed.
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions.
Battery should not be disposed of with general
household waste. Bring damaged or worn-out
batteries to your local recycling center or dispose
them to battery recycle bin found in stores.