4
INDICATION
“ModemCOM” has 2 LEDs for indication. They are located at the top part of the device. Due to these indicating LEDs
we can determine in which mode is the device operating, are there any shortcuts in its functionality or not. The indication
status of the modem is given in the Table 1.
Table 1. Description of modem status
“Power” is on
Power supply is connected
“Status” is green and blinking
Modem is powering up
“Status” is green
The device is ready to use
“Status” is yellow and blinking
No SIM card inside, no PIN code entered or any
possibility to connect to the GSM Network
“Status” is yellow
The device has successfully connected to the Network for
data transfer
TROUBLESHOOTING
1)
Problem: “Modem Control Tool” doesn’t detect the modem.
Solution: Check if the device is connected, green LED is on and yellow LED is blinking.
2) Problem: Can’t connect to the Internet,
Solution: Check if you plugged the device to the same COM port as you installed the driver.
This sign on the package means that it is necessary to read a User Manual, which is on the CD before
you start using the device.
This sign on the package means, that used electronic and electric equipment should be stored
separately.
FINAL NOTES
For more information, please read “ModemCOM” User Manual, which is found on the CD. If you have faced some
problems using the device, which you are not able to solve by yourself, you are always welcome to address our technical
support department by e-mail [email protected]. We will be very glad to help you.
