9
Handheld GPS/GSM Tracker GH1201
User’s Manual v1.05
Charging the battery
By connecting the device to one of the USB connectors of a PC or by using the 230V – 5V charger
available in the set it, is possible to charge the internal battery of the device. For the first time, it is advisable
to charge the battery using the 230-5V charger (not via PC).
-
Connect the charger and the device by using an USB cable.
-
Plug the charger in the alternating current wall socket.
After the device is connected to the PC or alternating current wall socket, the battery charging will start.
Charging is indicated by the indicator which is present on the GH1201 (see
Indicators of the device
). If, for
the first time, the device has been connected with an empty battery, the indicator starts to flash just after
several minutes.
Note: Only approved batteries, chargers and supplements supplied by TELTONIKA should be
used with this device. By using other sorts of batteries, chargers and supplements you risk to
be deprived of all guaranties and it may also be dangerous for you and your environment.
If an unsuitable SIM card has been inserted or the device fails to detect it, the device will reload
automatically and tries to start the connection anew. If the reconnection fails, the device will show it by its
indicator
(
Indicators of the device
).
If the card has been inserted later, the device must be switched off and switched on again or has to be
reloaded.
Note: As with any other radio communication transmitters, do not touch
its antenna when unnecessary. Touching the antenna may be a cause
for deterioration of the communication quality and the device may use
more energy when usual. The antenna of the device will operate better
and its battery will decharge slower if the surface of the antenna will not
be subject to touching when in use.
