Teltonica RUT900, Руководство пользователя

Страница: 55 / 141

6.2.2.2 Advanced
These are the advanced settings for each of the protocols, if you are unsure of how to alter these attributes it is
highly recommended to leave them to a trained professional:
6.2.2.2.1 Static
Field name Sample value Explanation
1. Disable NAT On/Off Toggle NAT on and off.
2 Override MAC address 86:48:71:B7:E9:E4 Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
address (i.e. that IP will only work with your computer). In this
field you can enter your computers MAC address and fool the
gateway in thinking that it is communicating with your computer.
3. Override MTU 1500
Maximum transmission unit
– specifies the largest possible size
of a data packet.
4. Use gateway metric 0 The WAN configuration by default generates a routing table
entry. With this field you can alter the metric of that entry.
6.2.2.2.2 DHCP
Field name Sample value Explanation
1. Disable NAT Enable/Disable If checked, router will not perform NAT (masquerade) on this
interface
2 Use broadcast flag Enable/Disable Required for certain ISPs, e.g. Charter with DOCSIS 3
55