9
REL2,ON,mm
Activate relay 2 (Output B) for
time mm (mm=01..99 min)
'OK(REL1,ON,
mm),credit'
Note:
credit The level of remaining credit on prepaid cards.
x..xx
telephone number
text
text of SMS message
SMS1 SMS message sent when unit is switch ON
SMS2 SMS message sent during activation input 1
SMS3 SMS message sent during activation input 2
SMS4-6 back up for OEM messages
)*
status – Inputs as same as outputs status in order
INPUT1, INPUT2, RELAY1, RELAY2.
INPUTx = 1 – stand by
0 – alarm status
RELAYx = 0 – switch off
1 – switch on permanently
2 – switch on for time 'mm'
verze – firmware version
imei – IMEI of integrated GSM modul
CAL,
after command CAL you can put various AT command
of used GSM modul (for example: modul reset , time
setting etc...) . The commands should be used by
authorised person only! It may cause demage of
all unit!
Closing contacts by ringing
The relay outputs might be closed on 2 sec (or time RTIME) by
ringing from various number saved on SIM card (Even ALARM
and ADMIN). The output A is closed by direct ringing, Output B
by „diverted ringing“. To create „diverted ringing“ we have to
get next telephone number (called „X“) , on which we activate
permanent divert to number used in GSM Key. To close output
B we do not call number in GSM Key but number „X“ – follow
is managed by GSM Key and GSM operator.
